Sybase DC35823-01-1500-04 - Manual (Page 78)

Configuring interfaces files for multiple networks
62 Adaptive Server Enterprise
You can concatenate the original server name and the network name. For
example, if your server is named PRODUCTION, you could choose the
names PRODUCTION_network1 and PRODUCTION_network2.
2 Do one of the following:
• For PC clients, use sqledit to create multiple sql.ini file entries for the
server, one for each network. In the following example, you create
one entry for PRODUCTION_network 1 and one for
PRODUCTION_network2. For more information, see the Open
Client documentation for your client platform.
• For UNIX clients, you can edit the interfaces files with an ASCII text
editor. From the server’s interfaces files, copy the server name line
and the “master” line for each network into the client interfaces file.
Add the appropriate server name for each entry, and change “master”
to “query.”
Clients on each network must use the DSQUERY value that
corresponds to the network the client is on. In the following example,
either PRODUCTION_network1 or PRODUCTION_network2 can
be used.
# Client entry for PRODUCTION on network1
PRODUCTION_network1<tab>3<tab>3<newline>
<tab>query tcp ether serv_corpnet 4559
# Client entry for PRODUCTION on network2
PRODUCTION_network2<tab>3<tab>3<newline>
<tab>query tcp ether serv_engnet 5479
Configuring for query port backup
Another use for multiple network interfaces is to provide a backup in case of
network failure. If a client is connected to a server via two networks, the client
can establish a connection via the second network if the first one goes down.
To configure Adaptive Server for query port backup:
1 Install multiple “master” and “query” lines in a server entry in the
interfaces file.
2 Adaptive Server listens for connections at both ports. Clients looking for
a host name and a port number for a connection to an Adaptive Server try
the port on each “query” line in order, until they establish a connection.