Operating your washing machine – Electrolux EWT606 User Manual

Page 11

Advertising
background image

Starting your washing machine
1. Turn on the taps
2. Close the lid
3. Press the Power button

The machine will ‘beep” twice, briefly display a number in
the digital display and then it is ready for you to select the
wash program settings.
Please wait for this to happen before attempting to operate
the machine.
If the displayed settings are what you want to use then
press Start/Pause to start the wash program.
To select a different program or change other settings, read
the following instructions.

NOTE: On powering up the machine, and also after a wash
has finished in preparation for the next wash, the water level
defaults to auto sensing and rinse defaults to Eco. (If your
last wash was a Drip dry / Deep rinse program, then rinse
will stay at deep).

Choosing your own wash program settings
sе е3ETTINGSåCANåBEåCHANGEDåATåANYåTIME åEVENåWHENåAå

wash is in progress or when the machine is paused.
7HENåRUNNINGåTHEREåWILLåBEåAåSHORTåDELAYåOFååSECONDSå
before a change to settings takes effect. This is to allow
you time to complete your desired changes.

sе е)FåYOUåMAKEåAåCHANGEåTOåSETTINGSåDURINGåAåWASH åTHEå

progress of the wash may not continue exactly from
where it was in the program before the change.

sе е7HENåYOUåTRYåTOåMAKEåAåCHANGEåTOåSETTINGSåANDåTHEå

selection you make is unavailable at the time, you will
hear a long ‘error beep’.

Program button

Press the Program button until the light
indicates the program you want to use.
Each press of the Program button changes
the wash program to the next program.
7HENåYOUåCHOOSEåTHEå7OOLåPROGRAM åTHEå
Deep rinse option is automatically selected
for you. You cannot select Eco rinse with
THEå7OOLåWASHåPROGRAM

Water Aid recirculation system active programs
Your machine is programmed with the recirculation system
active in most wash and deep rinse stages of the various
wash programs. The following table shows when the
recirculation is active during wash and deep rinse, for the
DIFFERENTåSETTINGSåOFå7ASHå0ROGRAMåANDå$IRTå,EVEL

Is the recirculation system active?

Dirt Level

Light

Medium

Heavy

7ASH Deep

Rinse

7ASH Deep

Rinse

7ASH Deep

Rinse

Wash Program

Intensive

No

No

No

No

No

No

Normal / Heavy

Yes

Yes

Yes

Yes

No

No

Normal

Yes

Yes

Yes

Yes

No

Yes

7OOL

Yes

Yes

Yes

Yes

No

Yes

Delicate

Yes

Yes

Yes

Yes

No

Yes

NOTE: Eco Rinse
With most programs you have an option of selecting an Eco
Rinse, in which case the Deep Rinse column of the table above
is not relevant. Recirculation is not active during Eco Rinse.

Operating your washing machine

electrolux water aid washing machine operating your washing machine 7

Power button

Wash program
(Program button)

Recommended
dirt level

Recommended
temp. wash water

Using the program

Intensive
*(includes 6 minute soak)

Heavy

(OTåORå7ARM

Select this program for a heavily soiled cotton wash
load.

Normal/Heavy

Medium

(OTåORå7ARM

Select this program for a full load of normally soiled
cottons.

Normal

Medium

(OT å7ARMåORå#OLD

Select this program for an average domestic load of
mixed fabrics.

Wool

Medium or Light

7ARM

Select this program for woollen clothes. Only wash
woollens labelled ‘machine washable’.

Delicate

Light

7ARM

Select this program for lingerie, lace trimmed and
embroidered items.

* Intensive has a built-in 6 minute soak period at the start of the wash program. Any soak period you have selected will be added to the 6 minutes. (See

information at “Soak option” on page 12)

Wash program guide

Advertising
This manual is related to the following products: