5 rear panel – EverFocus ECOR264-4D1 User Manual
Page 14
6
1.5
REAR PANEL
During initial setup you will be connecting your DVR to multiple input and output devices. This is done
through the rear panel.
Figure 1-2 Rear Panel
○
○
○
○
1
POWER:
Plug the DC 12V power source provided
into the power socket.
○
○
○
○
2
Alarm In:
Connect up to 4 alarm inputs, selectable between N.O./N.C. contacts or can accept
TTL/CMOS signal polarity.
○
○
○
○
3
Alarm Out: N.C or N.O type alarm out (form “C”).
○
○
○
○
4
RS485 socket: For remote control via RS-485 keyboards and telemetry control for attached PTZ
devices
○
○
○
○
5
55
5
Audio In:
Connect a line level audio mixer output/source to the audio input connection
.
○
○
○
○
6
Audio Out: Connect the input of a line level audio amplifier to the audio output connection.
○
○
○
○
7
Video In:
Connect camera’s video output or other composite video source to the video input
connection.
○
○
○
○
8
Video Out:
Main monitor - connect a CCTV monitor to the video output connection.
○
○
○
○
9
VGA:
Main monitor - connect a VGA monitor to the VGA output connection. VGA resolution is
1024x768.
○
○
○
○
10
USB 1.0:
USB port recommended for connecting the USB mouse.
○
1
○
2
○
3
○
9
○
4
○
6
○
5
○
7
○
8
○
10
○
11