EverFocus ECOR264-4D1 User Manual
Page 31
23
c.
Click “Go” button
12. Steps to remove a tour (if supported by the camera)
a.
Click “Tour” button
b.
Click the number of the desired tour
c.
Click “Delete” button
Click “C” to clear the digit in the number display
Click “X” at the top-right corner to hide the PTZ menu (see Express control below)
Click “Exit” to leave PTZ function.
3.6.2
Express Control of PTZ
If the PTZ control panel/menu has first been opened and then hidden, the mouse can be used to control
basic PTZ functions (Quick Mouse Control). The mouse cursor will change to different icons in different
areas of the screen. With Quick Mouse Control, the user can control PTZ direction, zoom, and focus by
clicking directly on screen. The screen is divided into 16 areas, with the outer ring is divided into 12 zones
used to control movement direction. The inner square of 4 areas is used to control zoom and focus.
Figure 3-3 Express Control PTZ
The screen is divided into a 4x4 grid. The function of each section is defined as below:
•
1: PTZ pan/tilt left and up
•
2, 3: PTZ tilt up
•
4: PTZ pan/tilt right and up
•
5, 9: PTZ pan left
•
8,12: PTZ pan right
•
13: PTZ pan/tilt left and down
Zoom +
Zoom -
Focus +
Focus -
1
2
3
4
5
6
7
8
9
10
11
12
16
15
14
13