Technical specifications, Electrical connection – Electrolux T37400 User Manual

Page 23

Advertising
background image

23

Technical specifications

Height x Width x Depth

85x60x57 cm

Depth with the door open

107 cm

Height adjustment

6 mm

Empty weight

32 kg approx.

Load (according to the programme)

max. 6 kg

(Different load sizes in some countries are due to different measuring

methods)

Use

Domestic

Permissible ambient temperature

+5°C to +35°C

This appliance complies with the following EC directives:
-

73/23/EEC of 19/2/1973 “Low voltage directive”

-

89/336/EEC of 3/5/1989 “EMC directive” including modification
directive 92/31/EEC.

Electrical connection

Specifications concerning the power supply are indicated on the rating
plate. The rated voltage and the type of current stated on the plate
must correspond to those which exist where the dryer is installed. Also
refer to the rating plate for the type of fuse required.
Permanent connection must be carried out only by a qualified engineer.

Warning! THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not
be observed.

Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance’s rating plate. (See picture on
page 11).

The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug supplied, a
13amp ASTA approved (BS1363A) fuse must be used.
Should the plug need to be replaced for any reason, proceed as
described below.
The wires in the mains lead are coloured in accordance with the fol-
lowing code:

125980461_1.qxp 2004-10-11 11:31 Page 23

Advertising