Crivit SL-1836 - Manual (Page 7)

7 GB
Notes on disposal
Please dispose of the product and packaging in
an environmentally friendly manner, separating
different materials for recycling as required!
Dispose of this item through an authorised
disposal company or through your local waste
disposal facilities - ask your local authority for
information if further guidance is required.
Ensure that you comply with all regulations
currently in force.
3 years warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and work-
manship and does not apply to misuse or impro-
per handling. Your statutory rights, especially
the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory
guarantees or through goodwill do not extend
the warranty period. This also applies to re-
placed and repaired parts. Repairs after the
warranty are subject to a charge.
IAN: 96739
Service Great Britain
Tel.: 0871 5000 720
(£ 0.10/Min.)
E-Mail: [email protected]
You can also find spare parts for your product at:
www.delta-sport.com, category Service - Lidl Spare Parts
Service
Step 2: wheel assembly
Push the pin (10) into the joint (fig. E).
Ensure that the threaded hole on the pin is facing
upwards. The pin should be inserted into the
joint far enough that the threaded hole and the
hole on the axle rod are above one another.
Now fix the short screw (7) in the threaded hole
(fig. F). Now push the wheel onto the joint and
fix it with the washer and the cap nut (fig. G).
Use the tool that is included for this purpose.
Step 3: Sunroof assembly
Release the pre-assembled locking screws and
the sleeves from the rod. Push the longer screw
out from the inside through the main frame.
Attach the sleeves and fix the rod with the
locking screw (fig. H). The sunroof is fixed in the
same way with the shorter screw.
Using as a transport aid
To use the beach chair as a transport aid, fold
the sun shade down so that it lies flat on the
surface of the chair, and then raise the foot
frame (fig. I).
adjusting the angle
The back support angle can be individually ad-
justed. Fold the back support completely flat
down onto the seat and then pull up horizontally.
You will hear audible ratchet sounds as you pull
it up, enabling you to select the angle of incli-
nation in individual steps.
Care, Storage, Maintenance
When required, wipe the article with a damp
cloth and a little mild cleaning agent if necessa-
ry. Dry the article thoroughly before you use it
again.
Maintenance! Check the bolted connections
regularly.