Ericsson KRD 103 117/1 - Manual (Page 14)

3. When the channel is clear, press the PTT switch to
transmit. The TX LED lights RED when you transmit. Hold
the radio with the microphone approximately two inches
in front of your mouth with the antenna at approximately
a 45-degree angle away from your head. Speak in a clear,
normal, conversational voice.
4. When you are through speaking, release the PTT switch
and listen for an answer.
Transmit During Scan
Depending on how your radio is programmed, you will
transmit on a particular Channel during the scan function.
TALK BACK HOME CH TRANSMIT ON
Enabled Disabled Current Channel
Disabled Enabled Home Channel
Enabled Enabled Home Channel
or
Current Channel
Note: If both conditions are programmed, the radio will
transmit on the Current Channel during
Drop Out Delay, and on the Home Channel
during scanning.
Transmit Time Out Timer
Continuous transmission time is limited. When you transmit
longer than the preset time, you hear a beep from the
speaker, and the radio automatically returns to receive
m o d e . W h e n y o u r e l e a s e t h e PTT b u t t o n , t h e
Time Out Timer is reset.
- 14 -