Crivit CEB 1400 A1 - Manual (Page 48)

44 CEB 1400 A1
GB
■
Protect the battery packs against moisture and
the penetration of liquids. After attaching the
battery packs to your shoes, they must always
be connected (even when not switched on) to
the insoles when outdoors. Thereby, the pen-
etration of moisture and soiling in the connec-
tor sockets or plugs will be avoided.
■
Operate the insoles only with the supplied bat-
tery packs.
■
Use only the supplied power adapter to charge
the battery packs. The power adapter is de-
signed for indoor use and may not be exposed
to moisture.
■
In the event of malfunctions or thunderstorms,
remove the plug from the mains power socket.
Initial use
Items supplied and transport inspection
The device is delivered with the following components as standard:
▯ 2 x heatable insoles with integrated heating elements and
connection cables
▯ 2 x Ni-MH battery packs
▯ Power adapter
▯ This operating manual
NOTE
► Check the contents to make sure everything is there and for
visible damage.
► If the delivery is not complete, or is damaged due to defec-
tive packaging or through transportation, contact the Service
Hotline (see chapter Service).
Disposal of the packaging
The packaging protects the device from transport damage. The
packaging materials are selected from the point of view of their
environmental friendliness and disposal technology and are
therefore recyclable.
The recirculation of packaging into the material circuit
saves on raw material and reduces the amount of
waste generated. Dispose of packaging material that
is no longer needed as per the regionally established
regulations.
IB_100082_CEB1400A1_LB1.indb 44 IB_100082_CEB1400A1_LB1.indb 44 20.06.14 10:38 20.06.14 10:38