Crivit V161 - Manual (Page 4)

7 8
Pure by HeiQ®
The inside padding is made with newly developed Pure Technology.
Pure is an anti-bacterial odour inhibitor featuring silver microcomposite particles
for sports and recreational garments developed and manufactured by the Swiss
High-Tech company HeiQ®.
The micro fibres of the helmet lining are made with an innovative, anti-bacterial
effective silver-technology. The anti-bacterial effect of silver has already been
well-established for centuries. HeiQ® has further fortified these characteristics to
effectively and permanently prevent an odour formation.
Anti Fog
The visor and the sun shade feature an anti-fog coating.
The anti-fog coating is the result of a special surface treatment that is used for
motorcycle visors among other things. This special coating prevents that the visor
fogs up quickly with breathable air. For these products this increases user safety.
Anti Scratch
To reduce the risk of scratching, the built-in visor and the replacement visor
feature a special coating. This coating prevents rapid scratching of the external
part of the visor.
Spectacle Wearers
The helmet is also suitable for spectacle wearers.
The wearing comfort for spectacle wearers improves with the passage formation in the
padding (spectacle wearer passage).
Snap-Fastener System
The snap-fastener enables an individual and quick
vernier adjustment of the chin strap.
Press the snap-fastener together until the helmet is
sitting comfortably but firm ( see Fig. A ).
Removable Inner Lining
The inner lining can be completely removed and
cleaned separately (see care instructions).
To remove the inner lining, firstly remove the helmet
collar and the cheek pads. Then undo the back press-
studs of the inner lining and pull the clips of the inner
lining from the front side of the helmet ( see Fig. B ).
Sun Shield
The integrated sun shield will enable you to quickly
and easily react to changed light condi-
tions with the aid of the patent mecha-
nism.
Using the slider ( 10 ) you can slide the
sun shield down ( see Fig. C ).
Note:
- Please take care that the edge of the sun shield does
not block your field of vision.
- The sun shield may only be used in combination
with the visor.
Acoustic Damping
The acoustic damping is for noise reduction, in par-
ticular when driving at high speeds.
Press the acoustic damping into the cavity of the
cheek pads ( see Fig. D ). The smooth, darker side of
the pad always points to the inside of the helmet.
Chin-Wind Deflector
The chin-wind deflector is attached to the helmet pad-
ding with a Velcro-strip.
This can be removed and re-attached as required
( see Fig. E ).