Crivit V161 - Manual (Page 6)

11 12
Storage
When not in use, store the helmet in a dry and well ventilated place at room temperature.
Avoid sources of heat.
Disposal instructions
Dispose of the product and all its components through a licensed disposal company or your
municipal disposal facilities. Please observe the current regulations. If in doubt, consult your
disposal facility about an environmentally friendly disposal.
Selecting the correct helmet size
- Choose your helmet by measuring the circumference of your head with a flexible tape meas-
ure. Always try on a couple of different sizes before buying a close fitting helmet. When
wearing the helmet, the skin of your temples should ideally move with it.
- Make sure that the helmet does not move around when the retention system is open.
- The retention system must be set securely. The chinstrap must sit comfortably under the chin
as far back towards the neck as possible. Fasten it as tight as possible. The right degree of
tension is reached once you find it difficult to insert your finger between the chinstrap and
neck, yet finding it easy to breath and swallow. Make sure that the helmet sits securely once
the retention system is on. Make sure that the helmet does not restrict your movements, e.g.
when turning your head to look behind you.
- Make sure the helmet carries a sticker certifying homologation.
Size table
Size Head circumference
S 55 – 56 cm
M 57 – 58 cm
L 59 – 60 cm
XL 61 cm