Encore electronic ENHWI-G - Manual (Page 10)

UNPACKING AND SETUP
This chapter provides unpacking and setup information for the Wireless Broadband
Router.
Unpacking
Open the box of the Wireless Broadband Router and carefully unpack it. The box
should contain the following items:
One Wireless Internet Broadband Router
One external power adapter
One CD-Rom with this User’s Guide
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
The setup of the Wireless Broadband Router can be performed properly using the
following methods:
The power outlet should be within 1.82 meters (6 feet) of the Broadband Router.
Visually inspect the DC power jack and make sure that it is fully secured to the
power adapter.
Make sure that there is proper heat dissipation from and adequate ventilation
around the Broadband Router. Do not place heavy objects on the Broadband
Router.
Fix the direction of the antennas. Try to place the Wireless Router in a position
that can best cover your wireless network. Normally, the higher you place the
antenna, the better the performance will be. The antenna’s position enhances the
receiving sensitivity.
4