Encore electronic ENHWI-G - Manual (Page 43)

Update: Click to update information for the user, if user has changed any of the
fields.
Delete: Select a user from the table at the bottom of the list and click “Delete” to
remove the user profile.
New: Click “New” to erase all fields and enter new information.
2.5.2 Protocol Filter
This screen enables user to allow and deny access based upon a communications
protocol list the user creates. The protocol filter profiles are listed in the table at the
bottom of the page.
Note: When selecting items in the table at the bottom, click anywhere in the item.
The line is selected, and the fields automatically load the item's parameters, which
user can edit:
2.5.3 IP Filter
This screen enables user to define a minimum and maximum IP address range filter;
all IP addresses falling in the range are not allowed Internet access. The IP filter
profiles are listed in the table at the bottom of the page. (Note: Click anywhere in
the item. Once the line is selected, the fields automatically load the item's
parameters, which user can edit.)
37