Crivit SP-803Y - Manual (Page 33)

IMPORTANT NOTES
• The helmet must sit securely and the chinstrap must be firmly fastened.
• do not wear scarves or other headgear under the helmet.
• ensure that the air circulation is not restricted.
• Always ensure that the visor is clean and free from scratches. damaged visors must be replaced
immediately. You can order replacement visors from the service address provided. Tinted visors
may not be used in the dark or when visibility is poor.
• The helmet is designed to protect the head in the case of impact. This protection is no longer
guaranteed after just one (even slight) shock. The helmet must therefore be replaced immediately
following an accident even if there is no visible damage.
• The helmet may not be transported hanging on the handlebars or any other part of the machine.
It must also be kept away from hot parts (for example the exhaust).
• Solutions or scouring agents containing petroleum should never be used to clean either the outside
or inside of the helmet. Please always use pH neutral detergent. Wipe the helmet dry with a soft
cloth. The padding can be cleaned using a soft brush and a little soap.
• only use genuine replacement parts for your helmet.