Crivit SP-803Y - Manual (Page 38)

ChANgINg ThE vISOR
removing the visor:
To remove the visor, push it up until it slots into the second last notch (Pos. 2).
Pull the slide in the direction of the arrow.
Carefully lift off the visor. Repeat the process for the other side of the helmet.
replacing the visor:
Place the visor in the correct position (see removal Point 1).
Pull the slide in the direction of the arrow.
Press down the visor until you hear it snap into place. ensure that the slide springs back
to its original position. Repeat the process for the other side of the helmet.
Caution:
remember to check the visor is firmly in place and fully functional!