Crivit FM-1401 - Manual (Page 17)

17
contents
1 x allen key
1 x tripod (A)
1 x telescopic pole (B)
1 x bicycle bracket (C)
1 x tool tray (D)
1 x front wheel stabiliser (E)
1 x instructions
Assembly
Set up the tripod of the bicycle assembly
stand by sliding the coupling (1) on the
tripod (A) all the way down.
Fold the feet (2) on the tripod legs down
and ensure the product is placed on a
solid and even surface.
Now insert the telescopic pole (B) into
the tripod, then mount the bicycle bracket
(C) onto the telescopic pole.
The tool tray (D) can be attached
anywhere on the tripod (A).
note
The feet on the assembly stand may
optionally be screwed into the surface to
achieve greater stability. Be sure to use
the suitable mounting materials.
This product also includes a stabiliser for
securing the front wheel of the attached
bicycle (E).
Fig. 1
2
d
B
c
2
2
2
1
e
A