Ericsson 230i - Manual (Page 30)

Extra features 29
No
t for
Co
m
m
ercial
Us
e
E
ri
css
on
Bu
si
ne
ss M
ob
ile
N
etwor
ks
B
V
Subscribing
It is possible to subscribe the handset manually to the 230i base station. It is
also possible to subscribe theDT200 handset to a base station other than the
230i base station and even to subscribe a different handset to the 230i base sta-
tion. The three different types of subscribing are described below.
Subscribing a DT200 handset to the 230i base station. To subscribe a
handset you need the base station PIN code. This PIN code is secret and pre-
vents other handsets from subscribing to the base station without your
approval. If the handset does not have a subscription, it automatically enters
the subscription mode when it is switched on. In this case, the handset dis-
plays Press <Page> base station first and then Enter AC: appears. If so, you can skip
step two and three of the procedure below.
Note If no language has been selected then the text is displayed in English.
The text language may change when the handset is successfully subscribed for
the first time.
To subscribe a DT200 handset to the base station:
1. Press the PA G E button on the top right side of the base station for at least
two seconds.
The base station now remains in subscription mode for five minutes.
2. Select Subscribe and press Y E S .
Enter AC: or Enter PIN: is displayed.
3. If Enter PIN: is displayed, enter the PIN code for the handset (see “Overview
of PIN and other codes” on page 23).
Enter AC:
is displayed.
4. Enter the PIN code for the base station (at delivery the PIN code is 1111,
see also page 23).
5. Press Y E S to confirm.
Subscribing is displayed.
6. Wait until Subscription Ready is displayed for a short time.
The handset is now connected to the base station. You can see its internal
phone number on the right-hand side of the display.
If the following message is displayed, try to subscribe again:
• Subscription Failed : the base station PIN code you have entered may be incor-
rect, or the base station already has eight handset subscriptions. To add a
handset you have to delete the subscription of another handset. See “Delet-
ing a subscription on the base station” below for more details.
At this point you may wish to change the menu language of the handset. See
“Language” on page 19 for more details.
Subscribing to a different base station. To subscribe your handset to a base
station other than the 230i:
1. Select Subscribe and press Y E S .
Enter AC: is displayed.
2. Enter the authentication code or the PIN code of the base station.
Each digit that you enter is shown as
for security reasons.
>Networks
>Subscribe
Enter AC:
Home 2
01–Dec 11:32
>Networks
>Subscribe
Enter AC: