Ericsson 230i - Manual (Page 31)

30 Extra features
No
t for
Co
m
m
ercial
Us
e
E
ri
css
on
Bu
si
ne
ss
Mo
bil
e
N
etwo
rk
s
B
V
3. Press Y E S to confirm.
Press <Page> base station is displayed briefly and then Subscribing appears.
4. Ensure that the base station is ready to subscribe as indicated in the appro-
priate base station manual. For example, for the cordless phone 230i base
station you have to press
PA G E for at least three seconds.
5. Wait until Subscription Ready is displayed for a short time.
The handset is connected to the base station. You can see its internal phone
number on the right-hand side of the display.
If you get the following message, try to subscribe again:
• Subscription Failed : the base station PIN or authentication code you have
entered may be incorrect, or the base station cannot add another
subscription.
Subscribing another handset type to the base station. Your base station
functions can be fully utilized when used in combination with a DT200 hand-
set. If it is used with another type of handset, there are a few functions that
will not work.
Please refer to the appropriate handset manual for subscribing another type of
handset to the base station. To initiate subscription, you have to press the
PA G E button on the base station for at least three seconds. The red light on
the top of the base station will then be on. The base station will remain in the
subscription mode for about 5 minutes.
Deleting a subscription on a handset
If a subscription is no longer required, you can remove it from the handset’s
subscription list.
Deleting a subscription on the base station
You can remove a handset subscription from the base station if that handset no
longer needs to connect to the base station.
Selecting another base station
The handset can connect to several base stations. It can select a base station
automatically when it has been out of range or is switched on. You can also
specify a base station for the handset to connect to.
Selection priority. The handset can select a base station automatically when
it has been out of range or is switched on. In this case, it searches for the base
stations in the order of priority starting with the first one on the subscription
list. If you wish to change the order of your subscription list, the base station
names can be re-arranged with this menu option.
Changing the base station name
You can rename each subscription entry. The name is shown in the display
when the handset is connected to that base station and on standby.
The handset can display several special characters. Please refer to “About the
phone book” on page 14 for more details.
Home 2
01–Dec 11:32
>Networks
>Delete
>BaseStation
>Access
>DeSubscribe
>Networks
>SelectNet
>Priority
>Networks
>Rename