Enterasys Networks 8000/8600 - Manual (Page 28)

Hardware Overview
16 Enterasys X-Pedition 8000/8600 Getting Started Guide
AC Power Supply
The power supply delivers 3.3, 5, and 12 volts DC to the X-Pedition’s control module(s), fan
modules, and other components. A single power supply provides enough current to operate a fully
configured chassis—with the exception of certain line cards. For information about these cards,
refer to Installing Line Cards
on page 71 . The power supply has its own internal cooling fan. The
vent on the front of the power supply is the inlet vent for the cooling fan. Figure 4 shows the front
view of an X-Pedition 8000 AC power supply.
Figure 4. Front view of an X-Pedition 8000 AC power supply
The X-Pedition 8600 power supply is nearly twice as large as the X-Pedition 8000 power supply.
Figure 5 shows the front view of an X-Pedition 8600 AC power supply.
Figure 5. Front view of an X-Pedition 8600 AC power supply
SSR-PS-8
100-125~5A
200-240~3A
50-60 Hz
PWR
PWR
SSR-PS-16
SN
100-125V~ 10A
200-240V~ 6A
50/60 Hz
TO REMOVE POWER TO
UNIT DISCONNECT ALL
POWER SUPPLY CORDS