Crivit Z32130 - Manual (Page 22)

22 GB
Press the SET button 3 and hold for about 3 seconds. “HOLD TO
RESET” appears in the bottom area of the display. The last recorded
altitude then appears in the bottom area of the display.
Total height gain (UP)
Press the SELECT button 2 in altimeter mode until the display „UP“
appears. The total height gain appears in the bottom area of the
display, the current altitude appears in the middle.
Press 3
Hold the SET button 3 pressed down to reset the minimum altitude to
0. “HOLD TO RESET” appears in the display
Total height loss (DOWN)
Press the SELECT button 2 in altimeter mode until the display
„DOWN“ appears. The total height loss appears in the bottom
area of the display, the current altitude appears in the middle.
Press 3
Hold the SET button 3 pressed down to reset the minimum altitude to
0. “HOLD TO RESET” appears in the display
34232_LCD-Sportuhr_content_GB_PL_HU_SI_CZ_SK.indd 22 12.03.14 10:49