Epson 500 Series - Manual (Page 94)

MNP Command Summary (continued)
Command Description
&Q6 Normal mode
&Y0 Recall user profile 0 at power up
&Y1 Recall user profile 1 at power up
%A n Set the auto-reliable fallback character ( n =0 to 127)
%C0 Disable data compression
%C1
Enable NMP5 data compression
%D0 Hang up without clearing buffer
%D1 Clear the receive buffer before hanging up
-C n Maximum string length ( n =6 to 250, default=32)
-D0 Set dictionary size to 512 entries and one/two-way mode (BTLZ)
-D1 Set dictionary size to 1024 entries and one/two-way mode (BTLZ)
-D2 Set dictionary size to 2048 entries and one/two-way mode (BTLZ)
-D3 Set dictionary size to 4096 entries and one/two-way mode (BTLZ)
-P0 Ignore parity for special characters
-P1 Process special characters only if they have correct parity
AT Register Summary
Command Description Range Unit Default
S0 Auto-answer ring number 0-255 1 ring 000
S1 Ring counter 0-255 1 ring
000
S2 Escape code character 0-127 ASCII 043
S3 Carriage return character 0-127 ASCII 013
S4 Linefeed character 0-127 ASCII 010
S5 Backspace character 0-31,127 ASCII 008
S6 Wait time, dialing 2-255 1 sec 002
S7 Wait time, before carrier 1-255 1 sec 030
S8 Dial pause duration 0-255 1 sec 002
S9 Carrier response 1-255 1/10 sec 006
S10 Carrier loss disconnect 1-255 1/10 sec 014
S11 Tone duration and spacing 10-255 1/1000 sec 095
S12 Escape guard time 0-255 1/50 sec 050
B-8 Fax/Modem