Florabest GR-1809 - Manual (Page 12)

12 GB
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following operating instructions. Use the product
only as described and only for the given areas
of application. Keep these instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Scope of delivery (figure a)
1 x Shelf (1)
4 x Plastic feet (2)
1 x Tilt protection for wall mounting
1 x Fabric strip (3)
1 x Dowel (4)
1 x Washer (5)
1 x Screw (6)
1 x Assembly Instructions
technical data
Dimensions: approx. 77 x 178 x 36cm
(W x H x D)
Weight: approx. 14.1kg
Maximum load capacity per shelf: 10kg
Material: powder-coated metal
Colour: matt black
correct use
This article is intended for the storage of e.g. pot
plants and decorative items. The article is desi-
gned for private use in the living area (balcony,
terrace, and conservatory).
Safety notes
important!
Read the assembly instructions through carefully
and always keep the instructions for later use.
danger to life!
• Never leave children unsupervised with the
packaging material. There is a risk of suffo-
cation.
• The product is not a climbing frame or a toy!
Ensure that nobody, especially children,
stands on the product or use it to pull them-
selves up. The product could tip over.
risk of injury!
• Ensure that the article is properly stable
before use.
• Place the article on a level surface.
• Be careful of your fingers when unfolding and
folding. Fingers may become trapped and
cause injury.
• Ensure that the article is fully clamped before
using it.
• Examine the article for damage or wear
before each use.
• Each shelf has a maximum load capacity of
10kg.
• We recommend using the included tilt pro-
tection for wall mounting.
assembly
the article should be assembled by at
least two people for better construction.
1. Remove the shelf (1) from the packaging and
lay it flat on the floor.
2. Insert the plastic feet (2) into the bottom of
the tube legs on the article (figure B).
3. Stand the article on the plastic feet and
unfold it (figure C).
caution: when unfolding the sidewalls
the shelves can fall down independent-
ly.
4. Fold down the shelves in such a way that they
hook into the locking mechanism (figure D).
5. Position the locking pin on the lower shelf
(figure E).