Melinera Z31617A-BS/Z31617B-BS/ Z31617C-BS - Manual (Page 10)

10 GB/IE/CY
Connect the extra-low voltage plug 7 with mains adaptor 2
Insert the mains adaptor 2 into the mains socket. The LEDs are
switched on.
Pull the mains adaptor 2 out of the mains socket to switch off the
LEDs.
Use the supplied suction cup 8 to hang up the lamp shade 1 in a
suitable place.
Note: The cable of the light chain must be secured without force and
must not be fastened with nails or similar. .
Cleaning and care
CAUTION! RISK OF ELECTRIC SHOCK! First of all pull the
mains plug out of the mains socket.
CAUTION! RISK OF ELECTRIC SHOCK! For electrical safety
reasons never clean the product with water or other fluids nor immerse it
in water.
Do not use solvents, such as petrol and the like, as they could
damage the product.
Use only a dry, fluff-free cloth for cleaning.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
102438_mel_LED-Leuchtstern_content_IE_CY.indd 10 17.03.14 13:19