Melinera Z31617A-BS/Z31617B-BS/ Z31617C-BS - Manual (Page 9)

9 GB/IE/CY
Avoid risk to life from electric shock!
Before use ensure that the available mains voltage agrees with the
operating voltage specified for the product (230 V∼).
Before connecting the mains adaptor 2 to the mains, always check
it for any damage.
Do not use the product if you discover it is damaged in any way.
Protect the mains lead from sharp edges, mechanical loads and hot
surfaces.
Never fix the product in place with clips or nails.
Before installing, uninstalling or cleaning, always pull the mains plug
out of the mains socket.
This product must not be electrically connected to another product.
Use the light set only with a mains adapter type TH-240006-1.
Failure to observe this advice will invalidate any claims under the
warranty.
Use
Note: The bulbs are connected in series. If one bulb is defective, up to
10 bulbs may not light up.
Unfold the lamp shade 1 (Fig. A and B).
Insert the LED bracket 4 with the LED light set 3 into the lamp
shade 1 (Fig. C and D).
Pull the cord 6 through the cord stopper 5 to close the lamp
shade 1 (Fig. D).
102438_mel_LED-Leuchtstern_content_IE_CY.indd 9 17.03.14 13:19