Eclipse - Fujitsu Ten CD5415 - Manual (Page 57)

57
How to use an optional remote control
[DISC] button
[ PRESET CH ] buttons
[BAND] button
[ TUNE SEEK ] buttons
Selecting a station (manually or automatically)
A short tap of the button will allow manual station tuning.
Pressing for more than one second will start automatic tuning.
Selecting preset stations
Switching disc mode
A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
“Manually setting stations into memory,” page 48.)
How to play CDs
Select the disc mode first.
When one or two CD changers are connected, press the
[BAND] or [DISC] button to change modes from CD
player
➔ CD changer 1 ➔ CD changer 2.
The indicator will skip a changer or player that has no
discs loaded.
Press the [ TUNE•SEEK ] button. 1
[ ] button: Tunes to higher frequency stations.
[ ] button: Tunes to lower frequency stations.
Press the [ PRESET CH ] button.
1
[ ] button: Select the next higher number preset button.
[ ] button: Select the next lower number preset button.
Press the [BAND] or [DISC] button. 1