Eclipse - Fujitsu Ten CD5415 - Manual (Page 61)

61
How to use an optional remote control
Replacing the battery
Remove the back cover of the remote control unit by
gently pressing and sliding it in the direction indicated by
the arrow. 1
Use two AAA-size batteries.
Install the two batteries provided into the compartment
as illustrated inside the compartment.
2
Return the back cover into place by sliding it in the
direction indicated by the arrow. 3
•Be extremely careful not to swallow the battery.
•The battery life is approximately one year. If the remote
control unit does not operate correctly or if the button lamp
gets dim, replace the batteries.
•Be sure to orient the batteries correctly so that the positive
and negative poles match the diagram.
•Do not use one new battery and one old one; use two new
batteries.
•Use only two of the same kind of battery.
•If any liquid is seen leaking from the batteries, remove both
batteries and dispose of them properly. Thoroughly clean the
battery compartment with a dry cloth. Then install new
batteries.
Caution
To prevent accidents, store batteries out of the reach of
children. If a child has swallowed one, consult a doctor
immediately.
Warning