Elite Screens 235 - Manual (Page 4)

4
Rev.051811‐AS
www.elitescreens.com [email protected]
Push
Push
( fig.2)
Insert the exposed ends of the joint connectors
into the short (vertical) frame and align the four
corners so that they meet at perfect right angles
4. Join all four frame parts together following the steps showed below (see fig. 2)
5. Make sure all four corners join correctly to form a perfect rectangle, then fasten the four angles
together by using the included joint screws. (see fig. 3)
Screw
( fig.3)