EdgeStar Model CW 2200 - Manual (Page 2)

Page 2
Help us Help You...
Before using your washer dryer read
this book carefully.
It is intended to help you properly operate
and maintain your new washer dryer.
Keep it handy for answers to your questions.
If you don’t understand something or need
technical assistance, please contact:
Technical Service and Support
101 3rd Street
Kentwood, LA 70444
Write down the model and serial
numbers
You will find them on a label fastened at the rear
of the unit. Before using your washer dryer
please write these numbers here.
Model Number
Serial Number
If you received a
damaged washer dryer
Immediately contact the delivery company,
dealer or the builder from which the unit
was purchased. Damage is not covered under
the manufacturers warranty.
Save Time and Money
Before you request service
Check the trouble shooting guide (Pages 19
to 21). It lists causes of minor operating
problems that you can correct yourself.
Energy - Saving Tips
The power and water consumption of your
washer dryer can be minimized if you follow
these suggestions.
• Operate washer dryer only in full load .
When you put in a partial cotton load, press the
Super Rinse button. This automates the cycle
for energy needs.
• If you don’t need pre-wash avoid using
cycle 1.
• Always select cycle 3 for cotton load and
keep temperature at 140.
• Always soak or treat stains before the
wash.
• Always select the maximum rpm spin speed
to reduce moisture content.
If you need Service
To obtain service see the warranty service page
in the back of this book. We’ re proud of our service
and want you to be pleased. If for some reason you
are not happy with the service you receive, here are
two steps to follow for further help.
FIRST contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT if you are still not pleased, write down
all the details and call 1.866.517.7287 Explain
your problem. A customer service representative
will assist you.
Phone: 1.866.517.7827