Exmark Operator Controlled Discharge for Walk-Behind Units OCDWB01 - Manual (Page 15)

Operation
Figure 21
1. Handle assembly 3. Clevis pin
2. Mounting bracket 4. Hairpin
4. Unlock the assembly and pivot it away from the
mower deck. Lift the OCDWB01 out of the deck
mounting tube.
5. Lower the existing discharge deflector.
Important: Reinstall the original discharge
deflector if it was removed during the
OCDWB01 installation.
6. The machine can now be used for side discharge
mowing.
15