Epson 50 User Manual
Page 25
Using Epson MovieMate with Other Equipment
25
Playing Epson MovieMate Audio Through an
External Audio System
You can connect MovieMate to an amplifier or digital audio recorder. To output sound from
MovieMate, the external equipment needs to have a digital coaxial audio input port.
You will also need a digital coaxial cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from MovieMate.
3. You may need to change the
Digital Output
setting in the Audio Setup Page. Select
All
if
you are connecting a DTS/Dolby Digital Decoder or PCM only if you are connecting
to equipment that is only compliant with linear PCM. For more information, see
page 39.
You can use any of MovieMate’s audio controls, as described on pages 17 and 20.
Digital Coaxial
Audio-Out
Digital coaxial cable