Epson 50 User Manual
Page 45
Advertising
Caring for Your Epson MovieMate
45
3. Loosen the lamp cover screw using the screwdriver that came with the replacement lamp.
(The screw won’t come all the way out.) Then slide out the lamp cover and remove it.
4. Loosen the two silver screws holding the lamp in place. (You can’t remove these screws.)
5. Grasp the lamp as shown and pull it straight out.
Note:
The lamp in this product contains mercury. Please consult your state and local
regulations regarding disposal or recycling. Do not put in the trash.
Advertising