Electrolux ENB 40405 W - Manual (Page 36)

36 electrolux
GB
Electrical Connection Electrical Connection
Any electrical work required to
install this appliance should be carried
out by a qualified electrician or
competent person.
This appliance must be earthed.
The manufacturer declines any
liability should these safety
measures not be observed.
Electrical Requirements
Before switching on, make sure the
electricity supply voltage is the same as
that indicated on the appliance rating
plate.
The appliance is supplied with a 13 amp
plug fitted. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used. Should the plug need to
be replaced for any reason. The wires in
the mains lead are coloured in
accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
The wire coloured green and yellow
must be connected to the terminal
marked with the letter “E“ or by the
earth symbol
or coloured green and
yellow.
The wire coloured blue must be
connected to the terminal “N“ or
coloured black.
The wire coloured brown must be
connected to the terminal marked “L“ or
coloured red.
Upon completion there must be no
cut, or stray strands of wire present
and the cord clamp must be secure
over the outer sheath.
Important!
The plug must still be accessible
after the appliance has been
installed.
The appliance should not be
connected to the electrical supply
by means of an extension cable.
In case that the electrical cable has
to be replaced, please contact your
local Service Force Centre.
Warning!
A cut off plug inserted into a 13 amp
socket is a serious safety (shock)
hazard. Ensure that it is disposed of
safely.
This appliance complies with
the following E.E.C.
Directives:
73/23 EEC of 19.02.73 (Low
Voltage Directive) and subsequent
modifications,
89/336 EEC of 03.05.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.
96/57 EEC - 96/09/03 (Energy
Efficiency Directive) and its
subsequent amendments