Setting up and connecting to the, Setting up and connecting to the power supply, Safety instructions – Rocktrail Car Cool Box RABB 12 A1 User Manual

Page 51: Items supplied and initial inspection, Unpacking, Disposal of packaging, Gb mt

Advertising
background image

48

Setting up and connecting to the ...

RABB 12 A1

GB
MT

Setting up and connecting to the power supply

Safety instructions

WARNING

During the commissioning of the appliance personal injury and
property damage could occur!

Observe the following safety notices to avoid these risks:

To avoid damage to people and property, pay heed to the requirements
for the installation site and the electrical connection of the appliance.

Items supplied and initial inspection

The appliance is supplied with the following components as standard:

Car cool Box RABB 12 A1

Connection cable with car plug

Carrying strap

Spare fuse for the car plug

Operating Instructions

NOTICE

Check the contents to ensure everything has been provided, and for signs
of visible damage.

If the contents are incomplete, or have been damaged due to defective
packaging or transportation, contact the Service Hotline (see chapter Service).

Unpacking

Remove all parts of the appliance and these operating instructions from the box.

Remove all packaging material and pull the protective foil on the control
panel off .

DANGER

Packaging material should not be used as a play thing by children. There is
a risk of suff ocation.

Disposal of packaging

The packaging protects the appliance against transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw materials
and reduces the amount of waste generated. Dispose of packaging material that
is no longer needed according to the regionally established regulations.

Buch_61537_LB5.indb Abs3:6

Buch_61537_LB5.indb Abs3:6

24.01.12 17:33

24.01.12 17:33

Advertising