Tronic KH 3002 - Manual (Page 4)

- 2 -
MOBILE POWER SUPPLY
KH 3002
Intended Use
This Energy Station is intended for mobile power
supply to low-voltage appliances of up to 10 A
power consumption. This appliance is intended only
for domestic use, it is not intended for use in commer-
cial or industrial applications.
Do NOT use this appliance for applications where
a power failure could result in damage, e.g. medical
equipment, aviation or space programme etc.
Preparation
Unpacking
1. Remove the Energy Station and its accessories
from the packaging.
2. Remove all adhesive tapes, foils and transport
restraints.
Attention!
Do not permit small children to play with the plastic
packaging. There is a risk of suffocation!
Check the items supplied
Before taking the appliance into use, check that all
items are present and free of visible damage.
1 Energy Station KH 3002
1 Carrying strap
1 Power supply unit
1 Vehicle adapter
1 Adapter cable
5 Adapter plugs
Technical Data
Energie Station
Rechargeable gel battery: 12 V / 7 Ah
Low voltage sockets: 3 V / 4,5 V
6 V / 9 V /
12 V
unstabilised / 1 A
Vehicle socket: 12 V / 10 A
Screw connections: 12 V / 10 A
for max. 2 mins.
Connector power pack
Power supply : 230 V ~ / 50 Hz
Output voltage: 12 V / 500 mA
Protection class: II /
Model: ZJF-DC120V050
Description of the appliance
 Front
1 Carrying strap
2 Mains switch (CHA/OFF/ON)
3 12 V/10 A Output
4 Low voltage sockets (3 V/4,5 V/6 V/9 V/12 V)
5 Indicator lamps for OUTPUT
(Red LED "Empty"/Green LED "Full")
6 Indicator lamps for CHARGE
(Red LED "On"/Green LED "Full")
7 Round fuse 2 A (T2A 250 V)
 Rear
8 Flat fuse 10 A (C10)
9 Screw connections 12 V / 10 A
0 Storage compartment for adapter cables
q Storage compartment for adapter plugs
w Charging socket DC-INPUT