Epson STYLUS 7890 - Manual (Page 167)

167
Maintaining and Transporting the Printer | 167
8. If the outer case is dirty, clean it with a soft, clean cloth dampened with
mild detergent. Keep the ink cartridge compartments closed to prevent
water from getting inside.
9. To wash the paper basket, remove the shafts, then machine wash with
mild detergent and air dry.
Transporting or Storing the Printer
If you are moving the printer a short distance (for example, in the same
building), you can roll it on its stand (see page 169). To ship the printer a
longer distance, you should repack it using the original box and packing
materials. Follow the instructions below to prepare the printer for shipment.
If you don’t have the original packaging, you can purchase replacement
packaging from Epson. See page 12 for more information.
Preparing the Printer for Shipment
1. Turn off the printer and wait until the carriage moves to the home
position (on the far right) and the P Power light goes off. Then unplug
the printer.
2. Remove the following parts:
• Power cord and interface cables
• Paper basket
• All paper or other media
• Optional Auto Take-Up Reel (if installed)
• Optional SpectroProofer Mounter (if installed)
3. Leave the ink cartridges installed.