Epson STYLUS 7890 - Manual (Page 21)

21
21
This chapter includes the following information:
• Unpacking and assembling the Pro 7890 and Pro 9890
• Connecting the power cord
• Installing ink
• Connecting to your computer and a network
• Installing the printer software for Macintosh or Windows
• Updating the printer firmware
• Configuring the printer for a network
Unpacking and Assembling the Printer
Follow these steps to assemble your printer and its stand.
Before you begin, make sure you have sufficient space to set up and use the
printer—at least 12 inches on all sides in addition to these dimensions:
• 53.4 × 35.6 inches (1356 × 903 mm) for the Epson Stylus Pro 7890
• 73.4 × 52 inches (1864 × 1318 mm) for the Epson Stylus Pro 9890
Chapter 1:
Setting Up the
Printer
WARNING: Four people are
required to unpack and set
up the printer.
Note: When choosing a
place for the printer, leave
adequate room for easy
access and ventilation.
Avoid locations subject to
direct sunlight, excessive
heat, moisture, or dust.
Also avoid locations near
potential sources of
electromagnetic
interference, such as
loudspeakers, cordless
phones, TVs, or air
conditioners.