United Office 2-in-1 Paper Trimmer - Manual (Page 28)

28 GB
Attention: improper use of the
device can result in severe injury!
The device must not be operated
by children! Keep children away
from the device.
Note: Failure to observe the safety labels can result in
severe personal injury!
Exemption From Liability
We cannot guarantee that the information which
relates to the technical properties of the product or to
the product itself contained in this document is correct.
The product and, where applicable, its accessories,
described in this document are subject to constant
improvement and further development. For this reason,
we reserve the right to modify components, accessor­
ies, technical specifications and related documentation
of the product described herein at any time without
notice.
Intended Use
This paper trimmer may only be used to cut paper,
card, photo paper and laminating foil.
Remove all paper clips and staples from paper before
using the device to cut the paper!
Using the device for any purpose other than the inten­
ded use described is considered unintended use.
It is forbidden to complete any modifications to the
device. Contravention results in the annulment of all
rights to legal, guarantee and warranty claims.
Overview
1. Rubber footpads
2. Selector knob
3. Setting lock
4. Guillotine arm
5. Guide rail
6. Lock
7. Pressing rail with finger protection
8. Blade
9. End cap
10. Rotating knobs
Features
For cutting photos, card, printouts or laminated paper
perfectly to size.
- Guillotine including pressing rail with finger pro­
tection.
- Trimmer with 3 types of cut (straight cut, perfora­
tion and wave cut)
- Visual positioning aids in cm (lines, angles, scale)
- Rubber footpads for secure, non-slip base
- Dimensions: 453 x 215 x 64 mm (L x W x H)
- Weight: 1.36 kg
- Cutting length, guillotine: 320 mm
- Cutting length, reel trimmer: 320 mm
Guillotine
Guillotine with integrated pressing rail and
finger protection, blade made of stainless
steel and a cutting capacity of max. 10
sheets (80 g / m²).
1. Remove the device carefully from the packaging.
2. Place the cutting unit on a stable, level working
base with the guillotine side facing up.
3. The guillotine arm is locked on the underside of
the cutting unit. To unlock the guillotine arm, pull
the locking latch out to the right to Position A and
LB1.pdf 28 LB1.pdf 28 15.02.2012 12:05:04 15.02.2012 12:05:04