Electrolux U30311 CH 700 - Manual (Page 5)

5
Description of the Appliance
• The cooker hood is designed to extract
unpleasant odours from the kitchen, it will
not extract steam.
• The hood is supplied as a filter unit (with
charcoal filter already supplied and fitted) and
can also be used with an extractor function
function by removing the charcoal filter.
Extractor version
• In this version fumes are extracted to the
outside via a hose connected to the coupling
ring.
Attention: The hose is not supplied and must
be purchased separately.
• Remove the grease filters and remove the
Charcoal Filter from its housing by
unscrewing the two screws that fix it to the
hood. Refit the grease filters.
• In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Should there already be a pipe of diameter 125
or 120 mm that ducts to the outside through the
walls or roof, it is possible to use the 150/125-
120 mm reduction flange provided. In this case
the hood will be slightly noisier.
Fig. 1 - Extractor version
To the outside
Coupling
ring
Hose
Coupling
ring
Charcoal
filter
Screw
Screw
Grease
filters