Electrolux U30311 CH 700 - Manual (Page 8)

8
Charcoal filter
• The charcoal filter is already supplied and
mounted in place.
• The charcoal filter should only be used if you
want to use the hood in the recirculation
function.
• Only applicable for recirculation. The charcoal
filters absorb smells and odours.
• The charcoal filter cannot be washed nor
regenerated.
The charcoal filter should be replaced every 6
months under normal use.
Replacement filters are available from your
local Service Force Centre.
Fitting:
• Unplug the unit or disconnect it from the
power supply
• Remove the metal grease filter.
• Fit the charcoal filter and fix it to the body
of the hood with two supplied screws.
• Refit the metal grease filters.
• To remove proceed in the reverse order.
• Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the
registration plate located on the inside of the
unit.
• The charcoal filter can be ordered from your
local ELECTROLUX Service Force Centre.
Changing the light bulb
• Disconnect the cooker hood from the main
supply.
• Remove the lamp cover, use a screw driver as a
lever.
• Replace the old bulb with a new one of the
same type.
• Refit the lamp cover.
• If the light does not come on, make sure the
bulb has been inserted correctly before
contacting your local Service Force Centre.
Fig. 5 - Fitting the Charcoal Filter
Fig. 6 - Changing the light bulb
Charcoal
filter
Screw
Screw
Grease
filters