Eclipse - Fujitsu Ten CD5425 - Manual (Page 111)

111
Mounting instruction
Mount the stud bolt to the main unit.
Insert the main unit into the mounting sleeve until it
locks in place.
Fasten the rear of the main unit using either method [A]
or [B].
Some automobiles may be equipped to secure the back of the main
unit using the stud bolt and supplied rubber support.
Select method [A] or [B] to suit the interior configuration of the
vehicle.
Install the bezel on the main unit.
[A]
[B]
TOP TO P
BEZEL 5
MOUNTING SLEEVE 2
STUD BOLT 8
BUSHING
METAL OF
VEHICLE
DASH BOARD
OR CONSOLE BOX
6
TOP TO P
BEZEL 5
MOUNTING SLEEVE 2
STUD BOLT 8
REAR BRACKET 4
SELF TAPPING
SCREW (6 x 16mm)
DASH BOARD
OR CONSOLE BOX
7
NUT (5mm)
METAL OF
VEHICLE
12
HEX-HEAD
BOLT
(6 x 20mm) 11
NUT (6mm) 13
CD5425.book 111 ページ ２００４年１２月１１日 土曜日 午後５時９分