Eclipse - Fujitsu Ten CD5425 - Manual (Page 58)

58
How to operate the MP3 player
Listening to MP3 file
Press the [DISC] button for less than one second to
switch to the CD player mode.
This starts MP3 file play.
If an external CD changer is connected, each additional press of the
[DISC] button will switch modes from CD changer 1
➔ CD changer
2 ➔ CD player.
A changer or player with no discs loaded will be skipped.
● Playback may be intermittent when there is a scratch on a CD
or when the recorded side is dirty.
● Only two external CD changers may be connected.
● Note ●
●When music data recorded in the normal way (CD-DA) is
present on the same disc with MP3 music files, the normally
recorded music data will be played. To listen to the MP3 music
files, press button [3] for more than one second.
● When a non-MP3 file is played, "NOSUPPORT" will appear.
● The optional CD changer cannot be used to play MP3 files.
Button [3]
[DISC] button
CD5425.book 58 ページ ２００４年１２月１１日 土曜日 午後５時９分