Ec declaration of conformity – Sealey SA26 User Manual
Page 5
EC DECLARATION
OF CONFORMITY
We the sole importers into the UK, hereby declare that the equipment described below
Description and Function: ..................................................................................................................................................
Model/Type: .......................................................................................................................................................................
Manufacturing Date / Serial number (optional): .................................................................................................................
Manufacturer's authorised representative within the EC: Jack Sealey Ltd. Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk, IP32 7AR
Conforms to the requirements of the following Directives, as indicated.
2006/42/EC Machinery Directive
2000/14/EC Outdoor Noise Emissions Directive
2006/95/EC Low Voltage Directive 2002/96/EC WEEE Directive
2004/108/EC EMC Directive
2002/95/EC RoHS Directive
93/68/EEC CE Marking Directive 97/23/EC Pressure Equipment Directive
And the following harmonised standard(s)
……………………………………………………………………………………………….......................................................
……………………………………………………………………………………………….......................................................
……………………………………………………………………………………………….......................................................
.........................................................................................................................................................................................
………………………............................................………
........................................................................................................................................................................................
Technical file compiled by: Jack Sealey Ltd.
Signed:……………………………………..
Date:………………………………............. Place: Bury St.Edmunds.
Name:…………………………………………
Position:…………………………………....
Being the responsible person appointed by the manufacturer.
Additional technical standards and specifications (if applicable):
2009/105/EC the Simple Pressure
Vessels Directive
Air Angle Drill 10mm Reversible
29-Jun-2012
Mark Sweetman
Managing Director
SA26.V3
BS EN 792 part 3: 2000 + A1: 2008
BS EN 28662 part 1: 1993