Sealey SBS35 - Manual (Page 3)

3.1 Attach one of the three assorted arms (fig.1), do this by taking the spring provided and placing it into
the circular recess on the grinders fixed arm.
3.2 Fit the arm as in fig.2, insert and tighten the thumb screw (fig.2C) through the arm and adjust as
necessary to make a straight fit.
3.3 Push the arm retraction lever (fig.2B, fig.3D) forward, this will shorten the length of the arm to make it
easier to apply a sanding belt, pull the lever back to tighten the belt.
3.4 Attach the dust collector to the exhaust (fig.3C) squeeze the two metal hooks together, this will enlarge
the rim of the dust bag to fit over the exhaust.
3. PREPARING FOR USE
fig.2 fig.1
Original Language Version
SBS35 Issue:3(SP)- 09/12/13 © Jack Sealey Limited
fig.3