Sealey PW1712 - Manual (Page 3)

Original Language Version
fig.6 fig.7
4. BATTERY CARE
4.1. Charge battery fully before first use.
4.2. Always keep the battery fully charged; recharge after each use.
4.3. If the machine is not in regular use, it is recommended that the battery is charged at least every 3 months.
4.4. To charge the battery, insert pin jack into the socket below the selector switch (fig.4) and connect the charger to a 230V mains
supply.
5. MAINTENANCE & STORAGE
5.1. The pump unit does not require any regular maintenance.
5.2 The 12V connector lead is fitted with an 8A fast blow cartridge fuse in the accessory socket. If blown, reeplace with identical fuse.
5.3. Should the nozzle become blocked, run the nozzle cleaning tool through gently to remove any deposits.
5.4 When disconnected from the hose, the nozzle can be back-flushed with either water or air to dislodge any blockage.
5.5. When not in use drain the machine, remove hoses and store in a cool yet frostproof location beyond the reach of children.
.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or phone 01284 757500.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
PW1712 Issue: 2 - 10/10/13 © Jack Sealey Limited
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705