Fig.1 fig.2 fig.3 fig.3 – Sealey CST806 User Manual
Page 2
Advertising
4. ASSEMBLY
4.1.
Remove the contents from the packaging and check them against the parts list, fig.1. Ensure that all the parts are there and not
damaged. If there are any problems contact your Sealey dealer.
4.2.
BACK WHEEL BRACKET ASSEMBLY Refer to fig.2 and A and B on Parts List on back page
4.2.1.
Attach the back wheel bracket assembly (2) to the bottom panel (1), using 2x8mm flat washers (32) and 2xM8 lock nuts (30).
4.3.
BACK WHEEL SUPPORT BAR Refer to fig.3
4.3.1.
Attach the wheel support bar (18), to the back wheel bracket assembly (2) and to the bottom panel (1), using 8mm flat washers (32)
fig.1
fig.2
fig.3 fig.3
CST806 | Issue 2(I) 15/05/15
Original Language Version
© Jack Sealey Limited
Advertising