Sealey AP1010 User Manual
Steel workbenches, Model nos, Instructions for
INSTRUCTIONS FOR:
STEEL WORKBENCHES
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1.
SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2.
INTODUCTION AND SPECIFICATIONS
1.1
GENERAL SAFETY
!
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
"
Locate bench in a suitable working area.
"
Keep the work area clean, uncluttered and ensure there is adequate lighting.
!
WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
"
Keep the bench clean and tidy in accordance with good workshop practice.
"
Keep children and unauthorised persons away from the working area.
!
WARNING! This bench is not electrically insulated and is therefore not suitable for electrical repairs of any sort.
#
DO NOT use the bench for any purpose other than that for which it is designed.
#
DO NOT carry out any work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure
the workpiece (available from your Sealey dealer).
#
DO NOT use the bench outside.
#
DO NOT get the bench wet, or use in damp or wet locations or areas where there is condensation.
#
DO NOT clean the bench with any solvents which may damage the paint surface.
!
WARNING! These workbenches are heavy and assistance should be obtained before assembling or moving them.
AP1010.V3, AP1015.V3, AP1020.V3 - 1 - 280906
Model Nos:
AP1010.V3 AP1015.V3 AP1020.V3
Model No:
AP1010
AP1015
AP1020
Height:
860mm
860mm
860mm
Width:
650mm
650mm
650mm
Length:
1000mm
1500mm
2000mm
AP1010
AP1015 / AP1020
These benches are supplied with a single lockable drawer, models AP1015 and AP1020 have drawer runners on both sides of the centre.
Manufactured throughout from steel plate for industrial durability and finished in red gloss to prevent corrosion. Includes a lower shelf for
additional storage.
3.
CONTENTS
ITEM
QUANTITY
WORKBENCH TOP
1
LOWER SHELF
1
DRAWER WITH RETAINING PLATE
1
LEGS
4
ITEM
QUANTITY
SELF TAPPING SCREWS
2
BOLTS
16
NUTS
16
WASHERS
32