Sealey AP2010 - Manual (Page 3)

AP2010 - 1 - 180102
01284 757500 E-mail: [email protected] 01284 703534
Sole UK Distributor, Sealey Group,
Bury St. Edmunds, Suffolk.
STEP 7. Place the wooden top (N) face down
on a flat, clean, smooth surface. Place the
cabinet upside down on the wooden top and
align it with the four pre-drilled holes. Fix with
the four hex head screws (S). Screw into place
the four adjustable leg levelers (R).
Place the finished workbench in its final location and adjust the leg levelers so that
the bench is both level and stable in use.
STEP 10. Put shelf component (K) into place at desired
height inside cupboard.
STEP 8. Bolt the four corner braces (I) into
place using 16 bolts (O), 16 lock washers (P),
and 16 nuts (Q).
STEP 9. Bolt one shelf part (K) to the underside
of the cupboard compartment as indicated
above using 4 bolts (O), 4 lock washers (P),
and 4 nuts (Q). Tighten all fixings and turn
workbench the right way up.