Sealey GSS150815 - Manual (Page 19)

GSS150815 Issue: 1 - 24/08/12
7.9 INSTALL THE ROOF
7.9.1 Self tapping screw fix the pre-assembled roof panel from 7.4; comprising items 39A, 39B and 50A.
7.9.2 With the shed located centrally about the plinth slab, position the 6 anchor steel angles (base brackets), M8
machine screw fix to internal compartment. This will require “spotting” and drilling 8mm diameter holes
through to shed panels. Spot through holes to plinth slab, remove anchor angles (base brackets) and
masonry drill slab for anchor bolts. Anchor bolts and M8 machine screws are supplied, see “FITTINGS PACK”.
7.9.3 Insert anchor bolts, re-fit steel angles (base brackets) and anchor shed to plinth slab.
© Jack Sealey Limited
Original Language Version