Sealey GSS2323 - Manual (Page 10)

Step 3: Assemble side wall panels.
Place 2 x 9S and 9M the sheeting on your work table and join together with the self tapping
screws per the diagram. Now fit 26K, 26J top channel and 26A, 26B bottom channel to the
sheeting by tapping it in or sliding it in. Note that the small lip of the channel is always facing
out. This is to ensure that rain water can not build up inside your shed. Make sure 26K and 26J
are used as top side channels. Now fix 34R and 34L the mid wall channels to the sheeting by the
self tapping screws. Please note that the groove should face downwards. Fix other channels by
the self tapping screws and enhance the strength by applying 66 the channel connectors.