Sealey GSS2323 User Manual
Page 18
Advertising
Slide in one side of the roof panel and note that the channel type 26E, 26F end is to the ridge
beam.
Repeat the same step for the other assembled roof panel. Drill the holes through for roof brace
by 3mm DRILL BIT. Then fix the roof brace per diagram. Join the sheeting and the gable by 52 the
lip and then fix the 4 corners by 16mm self tapping screws. (central screws marked cross NOT
fixed in this stage.)
Advertising
This manual is related to the following products: