Sealey WPP1750S - Manual (Page 2)

2. INTRODUCTION & SPECIFICATIONS
Manufactured from high impact stainless steel for added durability and corrosion resistance. A range of pond pumps suitable for creating
garden water features such as fountains and waterfalls. They also provide the important functions of filtration and water circulation which
are necessary to maintain healthy plant and fish life.
3. OPERATING INSTRUCTIONS
 WARNING! Ensure that you read, understand and apply the safety instructions in Section 1.
3.1. Start-up.
3.1.1. Place directly into the water. Put the pump on a horizontal surface, which is elevated by the edge of the basin to prevent the pump
from becoming excessively muddy.
Technical Data.
Model No: WPP1750S WPP3000S WPP3600S
Fountain Head Effects: Spume Spout 23cm 38cm 55cm
Water Clock Spout 42cm 70cm 85cm
Waterfall Spout 110cm/120cm 110cm 160cm
Outlet Size OD: 13mm 13mm 13mm
Maximum Output: 29ltr(6gal)/min 50ltr(10gal)/min 60ltr(13gal)/min
Maximum Head: 2.3mtr 3.2mtr 4mtr
Motor Power: 50W 85W 120W
Supply: 230V 230V 230V
Cable Length: 10mtr 10mtr 10mtr
3.2. Fountain Heads.
3.2.1. A selection of fountain heads are supplied with the pump (fig.2). Choose the desired style and install onto the outlet pipe.
3.3. Fountain and Water Spout Connection.
3.3.1. Additional water hose can be connected to the water spout connection (fig.1) with a hose of 19mm OD .
3.3.2. To open the spout connection, turn the regulating valve (fig.1) anticlockwise between 0-90° to adjust the flow between the spout and
the fountain head.
3.4. Water Spout Only.
3.4.1. Turn the regulating valve all the way clockwise to 90°. All the water flow will now be through the water spout.
fig. 1
fig. 2
Original Language Version
WPP1750S, WPP3000S, WPP3600S Issue: 1 - 19/11/13 © Jack Sealey Limited